|
Connector Part Information |
- 12065803
- 34-Way F Micro-Pack 100 Series (BLK)
|
Pin | Wire Color
| Circuit No.
| Function
|
Purpose |
Description |
Signal
Type
|
A1 | --
| --
| Not Used
|
|
|
|
A2 | LT GRN
| 11
| Headlamp High Beam Supply Voltage
|
Indicates to IPC the High Beam status |
12V = High Beam On
0V = High Beam Off
|
In |
A3 | WHT
| 103
| Headlamp Switch Headlamps On
Signal
|
Indicates to IPC the Headlight status |
12V = Headlight On
0V = Headlight Off |
In |
A4 | BLK/WHT
| 99
| Windshield Washer Fluid Level
Signal
|
Indicates to IPC the Washer Level status (must stay active for 1 minute) |
12V = Washer Level Low
0V = Washer Level Normal |
In |
A5 | --
| --
| Not Used
|
|
|
|
A6 | TAN/WHT
| 33
| Brake Warning Indicator Control
|
Indicates to IPC the Brake(!) light status |
12V = Brake(!) light Off
0V = Brake(!) light On |
In |
A7 | DK GRN/WHT
| 817
| VSS Signal
|
Indicates to IPC the Vehicle speed (4000 pulses per mile) |
Held 12V and pulsed to 0V by PCM indicating Vehicle speed |
In |
A8 | YEL/BLK
| 68
| Low Coolant Level Indicator
Control
|
Indicates to IPC the Coolant Level status |
12V = Coolant Level Low
0V = Coolant Level Normal |
In |
A9 | --
| --
| Not Used
|
|
|
|
A10 | DK GRN/WHT
| 357
| Oil Temperature Sensor Signal
|
Indicates to IPC engine Oil Temperature |
Has thermistor between this pin and B8 |
Analog |
A11 | GRY
| 1036
| IPC Class 2 Serial Data
|
Communicates with all other computer modules in the car |
7.5V (approx) = Data buss Active
0V = Data buss Idle |
Digital
In/Out |
A12 | --
| --
| Not Used
|
|
|
|
A13 | PNK
| 139
| Ignition 1 Voltage
|
Switched power
Footwell fuse 19 IPC (10A) |
12V = Ign Start and Run
0V = Ign Off |
In |
A14 | ORN
| 1640
| Battery Positive
Voltage
|
Full time unswitched power
Footwell fuse 25 BCM1& IPC (10A) |
12V = Always
0V = Blown fuse or wiring problem
|
12V |
A15 | LT BLU
| 14
| Turn Signal Lamp Feed-LF
|
Indicates to IPC the Left turn signal status |
12V = Left turn signal On
0V = Left turn signal Off |
In |
A16 | DK BLU
| 15
| Turn Signal Lamp Feed-RF
|
Indicates to IPC the Right turn signal status |
12V = Right turn signal On
0V = Right turn signal Off |
In |
A17 | WHT
| 121
| Engine Speed Signal
|
Indicates to IPC the Engine speed |
Held 12V and pulsed to 0V by PCM indicating Engine RPM |
In |
B1 | --
| --
| Not Used
|
|
|
|
B2 | BLK/WHT
| 238
| Driver Seat Belt Switch Signal
|
Indicates to IPC the Seat Belt light status |
12V = Seat Belt light Off
0V = Seat Belt light On |
In |
B3 | --
| --
| Not Used
|
|
|
|
B4 | PPL
| 333
| Brake Warning Indicator Supply Voltage [1]
|
Internally tied to pin A6 (see A6) |
Internally tied to pin A6 (see A6) |
In |
B5 | WHT
| 717
| Illuminated Display Signal
|
Controls backlight intensity for HUD, DIC, and Fog/Trunk switches |
PWM ground varied by Dimmer control.
100% (12V) = Dim, 0% (0V) = Bright |
Out |
B6 | GRY/BLK
| 1458
| Instrument
Panel Lamp Supply Voltage - 4
|
Indicates to IPC the Hazard switch status |
12V = Hazard switch On
0V = Hazard switch On |
In |
B7 | --
| --
| Not Used
|
|
|
|
B8 | BLK
| 470
| Oil Temperature Sensor Signal Low Reference
|
Indicates to IPC engine Oil Temperature |
Has thermistor between this pin and A10
(Internally connected to GND) |
Gnd |
B9 | --
| --
| Not Used
|
|
|
|
B10 |
-- |
-- |
Not Used |
|
|
|
B11 | WHT
| 375
| Skip Shift Indicator Control
|
Indicates to IPC the 1 to 4 Shift light status
(PCM can be programmed as shift light control) |
12V = 1 to 4 Shift light Off
0V = 1 to 4 Shift light On
Controlled by PCM |
In |
B12 | --
| --
| Not Used
|
|
|
|
B13 | BLK/WHT
| 851
| Ground
|
Ground |
Ground G104
Splice pack SP208 |
Gnd |
B14 | --
| --
| Not Used
|
|
|
|
B15 | BLK
| 150
| Ground
|
Ground |
Ground G201
Splice pack SP201 |
Gnd |
B16 | BRN/WHT
| 419
| MIL Control
|
Indicates to IPC the Check Engine light status |
12V = Check Engine light Off
0V = Check Engine light On
Controlled by PCM
|
In |
B17 | BRN
| 9
| Park Lamp Supply Voltage
|
Indicates to IPC the park light status |
12V = Headlight switch Park or Head
0V = Headlight switch Off |
In |